How to Build a T-Bucket Hot Rod Roadster

Double Trouble T: Four Times the Fun

| December 16, 2010 | Comments (0)

Gordon Tronson Double Trouble 1927 T Bucket

So, what drives a transplanted New Zealand hot rodder to take on scratch building a 1927 T roadster with not one, but two, all aluminum Ford 4.6L DOHC modular V8′s? Must be the Henderson, Nevada heat that overcame Gordon Tronson when, without the aid of any drawing, let alone blueprint, he started laying out the components on his garage floor.

Gordon Tronson Double Trouble 1927 T Bucket

Gordon’s next step was manually bending many yards of 1.5 inch tubing and welding up the frame for his creation.

Gordon Tronson Double Trouble 1927 T Bucket

Next, he shoved a Jaguar independent rear suspension with inboard disc brakes into place. In case you’re wondering the two mills are mated together with an innovative high-tech Gates Poly Chain Carbon belt and sprocket drive into a beefed Ford C5 transmission.

Gordon Tronson Double Trouble 1927 T Bucket

Up front, Gordon built his own independent front suspension employing 90s Corvette spindles and disc brakes and for good measure chose to steer it with a rack and pinion unit from a sand dragster.

Gordon Tronson Double Trouble 1927 T Bucket

With a few years of high end hot rod fabrication under his belt, Gordon’s eye for and execution of detail are everywhere in Double Trouble’s construction.

Gordon Tronson Double Trouble 1927 T Bucket

Builder Gordon Tronson during Double Trouble construction

Of course, Gordon wasn’t going to settle for just the power of two engines, so he decided on custom made blower manifolds for a pair of B&M superchargers.

Double Trouble 1927 T Bucket

And the end result is awesome! I’ve yet to see a twin-engine, side-by-side hot rod where everything goes together so beautifully.

Double Trouble 1927 T Bucket

Of course, it’s not just all engineering either, with a deep Candy Apple Blue paint job and liberal chrome accents setting off the beautiful powder-coated frame.

Double Trouble 1927 T Bucket

From the rear, the super wide Billet Specialties wheels wrapped with Mickey Thompson tires are a sight to behold that perfectly complement the proportions of the 1927 T body.

Double Trouble 1927 T Bucket

I’m a bit of a radiator and grille shell snob, but when it comes to cooling two engines in the Nevada desert this custom made Griffin unit does the job with style. And for those who might think those are dummy engines and this is something that’s pushed into and out of a trailer, take a look at the video.

You can check out more Double Trouble photos and info here>

Get Your FREE T-Bucket Frame Plans NOW!

Youngster's Free T-Bucket Frame Plans TBucketPlans.com's FREE gift to help start your T-Bucket Hot Rod adventure ...

Ron Young shows how to build a T-Bucket chassis: -- do it yourself & $ave!

  • -- 23 illustrated pages
  • -- Transverse sprung front-end and coil-over-shock rear
  • -- Yes, they’re FREE: no strings attached
  • -- >Enter your name, email and click Download Now


Check Out These Related Posts, Too:

Tags: , , , , ,

Category: T-Bucket Videos, T-Buckets of the 2000's